Nanocomposite thin film structures based on polyarylenephthalide with SWCNT and graphene oxide fillers

Investigations of nanocomposite thin films based on polyarylene- phthalide, single-walled carbon nanotubes and graphene oxide have been carried out. Using these films as a transport layer, field-effect transistors were assembled and their output and transfer characteristics were measured. The mobility of charge carriers was estimated and the obtained values are as follows: μ_PAP/GO = 0.020 cm² V^?1 s^?1 and μ_PAP/SWCNT = 0.071 cm² V^?1 s^?1.     

Luminescent Surface-Tethered Polymer Brush Materials

Surface-tethered polymers are unique molecular architectures that have been recently used in advanced sensors, electronics and biomedical applications. However, techniques for characterizing these materials in their surface-tethered form remain limited. The incorporation of luminescent functionality into these materials has enabled new characterization methods, while also unlocking new applications in optoelectronics, stenography and sensing. Micron-scale photolithography techniques have recently enabled the preparation of high-resolution patterns, as well as architectures with unique photophysical properties. Herein, we provide an overview of the techniques used to prepare luminescent polymer brush materials and their applications in stimuli-responsive sensors, cell adhesion materials, and optoelectronics. We also provide our perspective on the promising future uses of surface-tethered polymers, as well as the short-term challenges and opportunities in the field.     

高居里温度铁电单晶PIN-PT的机电性能

弛豫铁电单晶Pb(In_1/2Nb_1/2)O₃-PbTiO₃(PIN-PT)相较于常用的Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃(PMN-PT)具有更高的居里温度,在高稳定性、高性能的传感器、换能器方面具有应用前景。本工作采用谐振法研究了[001]方向极化的0.66PIN-0.34PT铁电单晶的全矩阵机电性能参数。0.66PIN-0.34PT 单晶的三方-四方相变温度(T_RT)约为160 ℃,居里温度(T_C)约为260 ℃,室温压电系数d₃₃、d₃₁、d₁₅分别为1 340 pC/N、-780 pC/N、321 pC/N,介电常数ε^T₃₃、ε^S₃₃、ε^T₁₁、ε^S₁₁分别为2 700、905、2 210、1 927,机电耦合系数 k₃₃、k₃₁、k₁₅、k_t分别为 87%、58%、38%、61%。其纵向压电常数(d₃₃)和纵向机电耦合系数(k₃₃)小于 PMN-PT 单晶,但是横向压电性能(d₃₁)和剪切压电性能(d₁₅)都略高于PMN-PT单晶。另外,研究了机电耦合性能随温度的变化趋势,发现0.66PIN-0.34PT单晶在150 ℃以下有较好的温度稳定性。     

Interplay of Hole Transfer and Host–Guest Interaction in a Molecular Dyad and Triad: Ensemble and Single‐Molecule Spectroscopy and Sensing Applications

A new molecular dyad consisting of a Cy5 chromophore and ferrocene (Fc) and a triad consisting of Cy5, Fc, and β‐cyclodextrin (CD) are synthesized and their photophysical properties investigated at both the ensemble and single‐molecule levels. Hole transfer efficiency from Cy5 to Fc in the dyad is reduced upon addition of CD. This is due to an increase in the Cy5‐Fc separation (r) when the Fc is encapsulated in the macrocyclic host. On the other hand, the triad adopts either a Fc‐CD inclusion complex conformation in which hole transfer quenching of the Cy5 by Fc is minimal or a quasi‐static conformation with short r and rapid charge transfer. Single‐molecule fluorescence measurements reveal that r is lengthened when the triad molecules are deposited on a glass substrate. By combining intramolecular charge transfer and competitive supramolecular interaction, the triad acts as an efficient chemical sensor to detect different bioactive analytes such as amantadine hydrochloride and sodium lithocholate in aqueous solution and synthetic urine.     

[Ru(dcbpy)2dppz]2+/Fullerene Cosensitized PTB7-Th for Ultrasensitive Photoelectrochemical MicroRNA Assay

A new cosensitization photoelectrochemical (PEC) strategy was established by using a donor–acceptor-type photoactive material, poly{4,8-bis[5-(2-ethylhexyl)thiophen-2-yl]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl-alt-3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophene-4,6-diyl} (PTB7-Th), as a signal indicator, which was cosensitized with bis(4,4′dicarboxyl-2,2′-bipyridyl)(4,5,9,14-tetraazabenzo[b]triphenylene)ruthenium(II) ([Ru(dcbpy)₂dppz]²⁺) embedded in the grooves of the DNA duplex and fullerene (nano-C₆₀) immobilized on the surface of DNA nanoflowers for microRNA assay. [Ru(dcbpy)₂dppz]²⁺ and nano-C₆₀ could effectively enhance the photoelectric conversion efficiency (PCE) of PTB7-Th as a result of well-matched energy levels among nano-C₆₀, [Ru(dcbpy)₂dppz]²⁺ and PTB7-Th, leading to a clearly enhanced photocurrent signal. Meanwhile, a target recycling magnification technique based on duplex-specific nuclease was applied in this work to obtain higher detection sensitivity. The proposed biosensor demonstrated excellent analytical properties within a linear detection range of 2.5 fm to 2.5 nm and a limit of detection down to 0.83 fm . Impressively, this cosensitization PEC strategy offers an effective and convenient avenue to significantly improve the PCE of a photoactive material, resulting in a remarkably improved photocurrent signal for ultrasensitive and highly accurate detection of various targets.     

HFIP-Functionalized Co3O4 Micro-Nano-Octahedra/rGO as a Double-Layer Sensing Material for Chemical Warfare Agents

Semiconductor metal oxides (SMO)-based gas-sensing materials suffer from insufficient detection of a specific target gas. Reliable selectivity, high sensitivity, and rapid response–recovery times under various working conditions are the main requirements for optimal gas sensors. Chemical warfare agents (CWA) such as sarin are fatal inhibitors of acetylcholinesterase in the nerve system. So, sensing materials with high sensitivity and selectivity toward CWA are urgently needed. Herein, micro-nano octahedral Co₃O₄ functionalized with hexafluoroisopropanol (HFIP) were deposited on a layer of reduced graphene oxide (rGO) as a double-layer sensing materials. The Co₃O₄ micro-nano octahedra were synthesized by direct growth from electrospun fiber templates calcined in ambient air. The double-layer rGO/Co₃O₄-HFIP sensing materials presented high selectivity toward DMMP (sarin agent simulant, dimethyl methyl phosphonate) versus rGO/Co₃O₄ and Co₃O₄ sensors after the exposure to various gases owing to hydrogen bonding between the DMMP molecules and Co₃O₄-HFIP. The rGO/Co₃O₄-HFIP sensors showed high stability with a response signal around 11.8 toward 0.5 ppm DMMP at 125 °C, and more than 75 % of the initial response was maintained under a saturated humid environment (85 % relative humidity). These results prove that these double-layer inorganic–organic composite sensing materials are excellent candidates to serve as optimal gas-sensing materials.     

Fluorescence Properties and Exciplex Formation of Emissive Naphthyridine Derivatives: Application as Sensors for Amines

Water-soluble donor–acceptor-type fluorophore 15Nap-Cl having two trifluoromethyl groups and a Cl group on a 1,5-aminonaphthyridine framework was prepared. Fluorophore 15Nap-Cl showed strong solvatochromic fluorescence, and, as the solvent polarity increased, a bathochromic shift was observed accompanied by an increase in the fluorescence quantum yield. In addition, in the presence of amines such as ethylamine, diethylamine, and aniline, further considerable bathochromic shifts in the fluorescence were observed. Density functional calculations identified the source of the fluorescence behavior as exciplex formation between 15-Nap-Cl and the corresponding amine. The fluorescence behavior was exploited to fabricate a sensor that can identify various primary, secondary, and tertiary amines.     

Tertiary Amines Differentiated from Primary and Secondary Amines by Active Ester‐Functionalized Hexabenzoperylene in Field Effect Transistors

Herein, we report two novel derivatives of hexabenzoperylene (HBP) that are functionalized with ester groups. Methyl acetate functionalized HBP ( 1 ) in single crystals self‐assembles into a supramolecular nanosheet, which has a two‐dimensional π‐stack of HBP sandwiched between two layers of ester groups. With the same self‐assembly motif, active ester‐functionalized HBP ( 2 ) in field effect transistors has enabled differentiation of tertiary amines from primary and secondary amines, in agreement with the fact that active ester reacts with primary and secondary amines but not with tertiary amines to form amides.     

An Ultrafast Molecular-Rotor-Based Fluorescent Turn-On Sensor for the Perrhenate Anion in Aqueous Solution

Devising sensors for the perrhenate anion in aqueous media is extremely challenging, and has seldom been reported in the literature. Herein, we report a fluorescence turn-on sensor for the perrhenate anion in aqueous media based on the aggregation-induced emission of a popular ultrafast molecular rotor dye, Thioflavin-T. The selective response towards the perrhenate anion has been rationalized in terms of matching water affinity, with the weakly hydrated perrhenate anion spontaneously forming a contact ion pair with the weakly hydrated ultrafast molecule-rotor-based organic cation, Thioflavin-T, which in turn leads to an aggregate assembly that provides a fluorescence turn-on response towards perrhenate. The sensing response of Thioflavin-T has been found to be quite selective towards the perrhenate anion when tested against anions that are ubiquitously present in the environment, such as chloride, nitrate, and sulfate anions. The formation of self-assembled Thioflavin-T aggregates has also been investigated by time-resolved emission and temperature-dependent measurements.